Surgeon grade rework and repair, by the book and guaranteed. ®
Newsletter | Contact Us
Phone: 978-374-5000
  

Coating and Marking Rework

We can remove or add coatings and solder mask where needed. A variety of methods may be used for removal, from chemical stripping, to abrasion, to micro-blasting. We can also add or remove legend and markings from the board surface.
  • We can remove conformal coatings and solder mask. We can also reapply coating and solder mask when needed. We can also repair or replace markings and legend on components and circuit board surfaces.
For prices on coating and mask repair and rework go to: Service Charges.
 

Related Guide Procedures

2.3.5 Coating Removal, Grinding/Scraping Method
Procedure covers the methods for removal of coatings on circuit boards.
2.3.6 Coating Removal, Micro Blasting Method
Procedure covers the methods for removal of coatings on circuit boards.
2.4.1 Coating Replacement, Solder Mask
Procedure covers the methods for replacement of coatings and solder mask on circuit boards.
2.4.3 Coating Replacement, Solder Mask, BGA Locations
Procedure covers the methods for replacement of coatings and solder mask on circuit boards.
 

Related Feature Articles

4 Techniques for Removing Solder Mask
There are several safe and reliable ways to remove solder mask from the circuit board surface. They all have advantages and disadvantages ...
Solder Mask Rework at a BGA Site
What happens when a BGA socket is phased out, but the solder mask is not updated. Solder mask is not needed for sockets, but ...
Solder Mask Touch-Up At BGA Sites
Solder mask is delicate and easily damaged or dislodged during BGA rework. If it isn't repaired, the result is often more rework ...
 

Related Products

201-3110 Base Board Repair Kit
Kit to repair base board and laminate damage on circuit boards.
115-1322 Circuit Bond Kit
Kit containing packages of clear, low viscosity, superior strength epoxy for circuit board damage repair.
Color Agents
One part, air-drying, semi-paste ink for printing on hard surfaces and used to tint the color of epoxy.
Need more information?
Use the form on our Contact Us page, or give us a call at 978-374-5000.
Customer Comments
"We've never had much luck sending our highly complex boards out for repair until we started using Circuit Technology Center. It's obvious that you must have the very best equipment and a highly qualified staff."
N.R. Montreal, Quebec, Canada
Do Your Repair Techs Deserve One?
Do Your Repair Techs Deserve One?
The Micro-Drill is the ideal tool for precision drilling, grinding and cutting on circuit boards. Use it to remove coatings, cuts circuits, drills holes, and much more.
Learn more ...
Discover 3 Options for BGA Rework
Discover 3 Options for BGA Rework
No matter how much we attempt to streamline and automate the process, BGA Rework has been, and will likely always be, a mixture of art and science.
Learn more ...
Must Have Circuit Boards First-aid Kits
Must Have Circuit Boards First-aid Kits
These kits have been used for decades by the most demanding electronics manufacturers. Every item is thoroughly field tested.
Learn more ...
Stop PCB Scrap Today
Stop PCB Scrap Today
What happens to your valuable circuit boards when they're damaged? Can they be repaired reliably and cost-effectively? Yes, if you have the skills and knowhow.
Learn more ...
ipc-logo Circuit Technology Center has been an IPC member since 1986
circuitmedic-logo
First-aid Kits for Circuit Boards ®
About Us | Base Board Repair | BGA Reballing | BGA Rework | Coating/Marking | Circuit Repair | Component Salvage | Conflict Minerals | Contact Us | Copyright/Disclaimer | Directions | ECO/Modification | Feature Articles | Frequent Questions | Gold Contacts | Intranet | Inspection | Order Tracking | Newsletter | Plated Hole Repair | Prices, Terms, Delivery | Products | Privacy | REACH | RoHS | Services | SMT/BGA Repair | SMT/PTH Rework | Sitemap

Circuit Technology Center, Inc.
22 Parkridge Road
Haverhill, MA 01835 USA
Copyright © Circuit Technology Center, Inc.. All rights reserved.