Our high-reliability BGA Reballing service can quickly rework BGA components that require reballing. Reballing is often required when the alloy of the BGA component solder balls needs to be changed from lead-free to leaded. Every BGA Reballing project is completed to meet IPC and JEDEC specifications.
We use reliable, repeatable, and industry-wide proven processes to reball BGA components in compliance with the following.
J-STD-001 Requirements for Soldered Electrical and Electronic Assemblies
GEIA-STD-0006 Requirements for Using Solder Dip to Replace the Finish on Electronic Piece Parts
IEC TS 62647-4 Process management for avionics - Aerospace and defense electronic systems containing lead-free solder - Part 4: Ball grid array (BGA) re-balling
IPC 7711/7721 Rework, Modification and Repair of Electronic Assemblies
Re-balled BGA device.
We can perform ball-attach to LGA and QFN devices. BGA component reballing services are available for BGA components with 0.4 mm pitch and up.
Post-reball verification and inspection services include shear testing, XRF alloy verification, visual inspection to confirm sphere condition, ball alignment, size, and location, x-ray inspection for excessive voiding and component marking using thermally printed labels or laser marking.
In addition to BGA component reballing, we have seven top-line Air-Vac BGA rework systems and a fully trained staff of engineers and operators to support your BGA component rework needs.
This combination of BGA component reballing services and BGA component rework services provides you with a single source to meet project demands and tight schedules while meeting the highest quality standards. We're recognized as an industry leader in BGA services and have been qualified by companies around the world.
Whether you have one board or one thousand boards for rework, we're the company to turn to for BGA rework and reballing services. All projects are completed in our modern, fully compliant facility.
In house post-processing testing capabilities include:
Ionic cleanliness (ROSE) testing per IPC-TM-650-2.3.25
XRF for alloy composition and finish thickness per JESD 213
X-ray inspection for solder ball void analysis per J-STD-001
Solderability testing per J-STD-002
Visual inspection
Other available testing services include:
SAM (scanning acoustic microscopy) testing per J-STD-035
Ball shear testing per JESD22-B117
Destructive physical analysis (DPA) per MIL-STD-1580
Hermeticity testing (fine and gross leak) per MIL-STD-883
Use the form below to contact us, to request a quote, or to place an order. You may also call us during normal business hours at 978-374-5000. * Indicated required field.