|
February 11, 2026 |
Consider a typical scenario in which a project is already overdue, and you learn that a 150-pin connector needs to be replaced. Desoldering the connector one pin at a time using vacuum desoldering tools just won't cut it. Quickly removing and replacing a large multi-pin connector can seem daunting, but it really isn't. Here's how to do it. The solution, and likely the best method, is to reflow all the solder joints at ...
Feature Story |
When circuit traces fail, or designs change, precision jumper wire installation restores electrical continuity without compromising reliability. Our guide outlines IPC-aligned best practices for selecting, routing, terminating, and bonding jumper wires to meet high-conformance standards. A practical resource for technicians performing PCB repair and modification in demanding electronic assemblies ...
Guide of the Month |
When critical components are delayed or obsolete, production doesn’t have to stop. Our new step-by-step guides outline proven methods for safely reclaiming, conditioning, and requalifying salvaged components - helping manufacturers maintain reliability and keep builds moving despite ongoing supply challenges.
LEARN MORE |
Microscopes are essential tools in the rework and repair department. While there have been many applications for other types of manually operated vision systems, such as illuminated magnifiers and CCTV-based systems, the importance of microscopes has been driven by the ever-shrinking size of electronic components, connections, and assemblies ...
Feature Story |
|
Cartoon of the Day
|
|
"Enough about my day... tell me about your day."
Copyright © Randy Glasbergen
|
|
Trivia
Approximately, how much did the first 5MB hard drive weigh? 20 pounds, 200 pounds, or 2000 pounds
See the answer below.
|
Quote of the Week
"Man will occasionally stumble over the truth, but usually manages to pick himself up, walk over or around it, and carry on."
Winston Churchill |
|
|
