| September 25, 2024
|
Electronic components are soldered to circuit boards every day, and in some cases, opens are found during x-ray inspection or test. You may be inclined to reheat and reflow the solder using a little extra flux. It's reasonable to think this will work, but it can be disappointing when ineffective. The process may be repeated at higher temperatures or ...
Feature Story
|
We need to assemble approx. 50,000 straddle USB connectors per year. What is the best way of mounting these on the edge of the board, ideally using an automated process?
Ask the Experts
|
Circuit Technology Center has released a technical paper highlighting six common mistakes encountered during BGA rework operations. This new paper offers valuable insights and effective methods to help prevent their occurrence.
FREE DOWNLOAD
|
This procedure was used to modify a batch of circuit boards with a signal error at a via-hole location. A via hole on this multilayer circuit board was mistakenly connected to layer nine when it should have been connected to layer 15. This is genuine micro-surgery ...
Feature Story
|
The world is accelerating rapidly towards a stage in history marked by increased automation and interconnectivity and leveraging technologies such as artificial intelligence and robotics. A sometimes-overlooked ...
Technology Briefing
|
 |
"It doesn't matter how much you scoot around the office in your swivel chair...you can't deduct it as business travel."
Copyright © Randy Glasbergen
|
|
Trivia
What color is an airplanes black box recorder?
See the answer below.
|
Quote of the Week
"Enough research will tend to support your theory."
Murphy's Law of Research
|
|
|
