|
|
About Us
For over 25 years Circuit Technology Center has been the world's most innovative specialist in circuit board rework and repair. Whether supporting you with our comprehensives services or with products from our CircuitMedic brand, our mission is simple. Save you money, save you time, and make your company more profitable.
Jeff Ferry, President
Peter Vigneau, GM
Andy Price, Sales Manager
|
|
[an error occurred while processing this directive]
|
[an error occurred while processing this directive]
[an error occurred while processing this directive]
|
[an error occurred while processing this directive]
|
|
|
Operation Gold Finger
All that Glitters
Gold edge contacts can become worn, damaged or contaminated by solder and must be either repaired and restored, or replaced. Generally, two options are available to confront problem gold edge contacts: replace the contact or re-plate with gold. Both procedures result in a high conformance level of repair that is reliable and long lasting. Re-plating is a reliable, yet complicated, process requiring a considerable amount of setup, special chemistries that are hazardous ...
Circuit Technology Center
|
[an error occurred while processing this directive]
BGA Footprint Mismatch
Daughter Card to the Rescue
You have a new board and the BGA component doesn't fit the board footprint. Is this a nightmare of a problem? It is one we see at Circuit Technology Center every other month or so. It’s seems to be a problem faced by OEM’s early in the development cycle. In this actual example the flagship product an OEM is working on has gotten to the post assembly test phase and there's a ...
Circuit Technology Center
|
|
[an error occurred while processing this directive]
|
[an error occurred while processing this directive]
[an error occurred while processing this directive]
[an error occurred while processing this directive]
[an error occurred while processing this directive]
Rework Magic
Soldering Tips and Tricks for Successful Rework
Although soldering, the process of joining two metals by the use of a solder alloy, is one of the oldest know joining techniques, manual or hand soldering is still a process highly dependent upon individual operator skill. And, while soldering and rework have become increasingly automated in recent years, we nevertheless operate in an imperfect world, and defects in the mass soldering process will occur. The need for hand soldering continues. Despite attempts to optimize our automated processes, faulty solder joints resulting from improper soldering or rework remain a major cause of ...
Circuit Technology Center
|
|
|
|
[an error occurred while processing this directive]
|
[an error occurred while processing this directive]
[an error occurred while processing this directive]
|
[an error occurred while processing this directive]
[an error occurred while processing this directive]
|
[an error occurred while processing this directive]
[an error occurred while processing this directive]
|
|
|
|
Circuit Technology Center, Inc.
135 Ward Hill Avenue, Haverhill, MA 01835 USA
Copyright © 2007 All rights reserved.
CircuitMedic is a Circuit Technology Center Brand
A publication of Circuit Technology Center and CircuitMedic.
This email was sent to: {{user("email")}}
To change you subscription visit our Subscription Page. {{ openrate() }}
|
|
|
|
|
Designed by Newsletter Station
|
|
| | |
| | | | | | | |
