Calibration Record CLR1056 Revision A  |   ECN200  |   Rev Date: Nov 1, 2001

TR-3C Bonding Press (CLR1056, S# 003S)
Written By: J. Ferry


Description
Used to thermally bond circuit frame pads, contact edges, and etches to PC Boards

Make/Model
Circuit Technology Center, Model TR-3C, S/N 003S

Calibration Interval
1 year

Next Calibration Due
Jan 30, 2009

Calibration Procedure
Refer to Bonding Press or TR-3 Calibration temperature and pressure procedure in file for specific instructions.

Calibration Log
Date Calibrated By Corrections
Aug 15, 2001 N. Arivella Passed
Aug 15, 2002 N. Arivella Unit passed thermal and pressure test. There is evidence of lateral movement in the ball slide. This will be addressed in September.
15 Aug 2003  R. Barrett  Passed thermal. Replace wear strips and recalibrate for pressure by 10 Sep 2003. 
22 Sept. 2004 R. Barrett and E. Farnham  Started Aug 18 but final press comparisons and checks dragged on due to vacations etc.
Aug 2005  R. Barrett and E. Farnham  Passed 
 Aug. 24, 2006  E. Farnham  Passed thermal and pressure tests
 Jan 9, 2008  R. Barrett Passed thermal & pressure tests
     
     


Index

logo Circuit Technology Center, Inc.
135 Ward Hill Avenue, Haverhill, MA 01835 USA
IPC Official Certification Center  |  Copyright © 2006 All rights reserved.

About Us  |   Free Newsletter  |   Contact Us